Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 288 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Heatmiser neoair kit

Former Community Member
Former Community Member
So I recently fit one of these.


It is only needed for the heating of the house. So the hot water and boiler isn’t needed, meaning it wasn’t wired in. 


now I’ve had the customer call saying that it’s bringing heating on but it sometimes doesn’t close the valve or sometimes delays to open the valve? 

https://www.elementshop.co.uk/heatmiser-neoair-kit-with-rf-switch-white?gclid=CjwKCAjwiOv7BRBREiwAXHbv3DEbJUBcUlP6PojMLJT6Kessy8bd2D9Qej3r8WB8RxLJpHoiv3c4sRoCiAcQAvD_BwE
  • 0
    Two port or three port valve?


    Photo six is a wiring diagram and shows the boiler switched by the base unit for heating only.


    Andy B.
  • Former Community Member
    0 Former Community Member
    Sparkingchip:

    Two port or three port valve?


    Photo six is a wiring diagram and shows the boiler switched by the base unit for heating only.


    Andy B.


    It’s a 2 port valve. So I I currently have it wired with a permanent live, and a Channel live, along with the valve switch on the outgoing.


Community Rules & Guidelines