Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 32 subscribers
  • Views 546 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Two earth paths?

Former Community Member
Former Community Member
  • came across a house split into 2 flats.two seperate cutouts/meters. The earthing was running from one cutout, to the earthing block (1st flat )then to the gas pipe(10mm). Then from that gas pipe to the 2nd flat earthing block. But earthing also coming from that 2nd cutout to the 2nd board earthing block. Is that a problem 

  •  

Parents
  • 0
    Both installations need a means of earthing and if the gas pipe is common to both installations then it needs to be bonded by both installations (or at one common point if both installations are supplied from a single common point) - so what you describe sounds to be correct.

       - Andy.
Reply
  • 0
    Both installations need a means of earthing and if the gas pipe is common to both installations then it needs to be bonded by both installations (or at one common point if both installations are supplied from a single common point) - so what you describe sounds to be correct.

       - Andy.
Children
No Data

Community Rules & Guidelines