Although it says for a Liberty 110, these may be of use?
To get the Night and Day reading on a 'Liberty 110' smart meter, press 9 on the meter's keypad. It's only with the standard 'Liberty 100' smart meter that you need to press 6 if it's Economy 7 (for Day and Night readings) and 9 to get the single rate reading.
To take a meter reading on a standard electricity tariff:
Press 6 on the keypad.
You'll see the letters “IMP R01” appear on the screen.
Wait a moment – then eight digits will appear, followed by “kWh” towards the bottom right of the screen.
Take the first 7 digits – this is your reading.
To take a meter reading on an Economy 7 electricity tariff:
Press 6 on the keypad four times.
Wait a moment – your day/peak and night/ off-peak readings will show up on the screen one after the other, starting with off-peak.
For your off-peak reading, you'll see “IMP R01” onscreen. A second later, you'll see your meter reading: eight digits, with “kWh” towards the bottom right of the screen.
For your peak reading you'll see “IMP R02”. A second later, you'll see eight digits, with “kWh” towards the bottom right of the screen. You'll only need to take the first 7 digits when taking each of these readings (i.e. nothing after the decimal place).
Although it says for a Liberty 110, these may be of use?
To get the Night and Day reading on a 'Liberty 110' smart meter, press 9 on the meter's keypad. It's only with the standard 'Liberty 100' smart meter that you need to press 6 if it's Economy 7 (for Day and Night readings) and 9 to get the single rate reading.
To take a meter reading on a standard electricity tariff:
Press 6 on the keypad.
You'll see the letters “IMP R01” appear on the screen.
Wait a moment – then eight digits will appear, followed by “kWh” towards the bottom right of the screen.
Take the first 7 digits – this is your reading.
To take a meter reading on an Economy 7 electricity tariff:
Press 6 on the keypad four times.
Wait a moment – your day/peak and night/ off-peak readings will show up on the screen one after the other, starting with off-peak.
For your off-peak reading, you'll see “IMP R01” onscreen. A second later, you'll see your meter reading: eight digits, with “kWh” towards the bottom right of the screen.
For your peak reading you'll see “IMP R02”. A second later, you'll see eight digits, with “kWh” towards the bottom right of the screen. You'll only need to take the first 7 digits when taking each of these readings (i.e. nothing after the decimal place).
