Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 36 replies
  • Subscribers 32 subscribers
  • Views 3122 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Last few days/hours to comment on Amendment 2, BS7671 before the shutters close

mapj1
Just a reminder the deadline for comments on the latest draft for  comment is fast approaching - this Friday the 11th in fact. (Though it is not clear if that is midday or midnight, so probably best to log in and out again before the end of Thursday..)


If you wish to comment and have not yet done so you need to create an account on the BSI website

Click on login/register on the RHS of the BSI welcome page  and  give them an email you can read without needing to change machine, as you need to click a verify link they send you.

Once logged in  search for "BS 7671:2018" oddly searching for BS 7671 without the space between BS and 7671:2018 does not find it...

There are 4 links as the thing is a bit of a monster. PDFs of each part can be downloaded for perusal, but to finally comment you need the on-screen viewer (the Read Draft and comment button)

This is not quick so allow plenty of time.



regards Mike
Parents
  • 0
    If the test button gets the thing to trip it's probably checked the things that are most likely to fail (software crashed or mechanics jammed). Rather like the RCD test button - it may not spot 100% of possible problems (e.g. slightly delayed action) but in probably 95% of real world problems if the RCD has failed then the test button doesn't cause a trip.


    We should also be consistent with other protective devices - we don't disregard the benefits of a fuse or MCB because we can't test them...

        -  Andy.
Reply
  • 0
    If the test button gets the thing to trip it's probably checked the things that are most likely to fail (software crashed or mechanics jammed). Rather like the RCD test button - it may not spot 100% of possible problems (e.g. slightly delayed action) but in probably 95% of real world problems if the RCD has failed then the test button doesn't cause a trip.


    We should also be consistent with other protective devices - we don't disregard the benefits of a fuse or MCB because we can't test them...

        -  Andy.
Children
No Data

Community Rules & Guidelines