Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 44 replies
  • Subscribers 32 subscribers
  • Views 3781 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Do you install fire alarm systems?

Chris Pearson
Bit of thread drift going on elsewhere, so I have started a new one.


"Do you install fire alarm systems?" - a question which is asked on insurance renewal, but what does it mean?


IMHO, there is a world of difference between providing a mains supply with third core for linking for a couple of smoke detectors and a heat detector in the kitchen on the one hand (i.e. the minimum grade D2 LD3); and a full on panel with separate detectors and sounder etc. (grade A LD2) in a large house. I consider myself perfectly capable of providing the former, but have never attempted the latter.


So where does the threshold lie? I'd be interested in views on certification too please.
Parents
  • 0
    Agree with limiting I&T to the supply only.

    Similarly, fine to test fixed wiring for domestic smokes/heats, even to ensure continuity of interconnect core, but should we be responsible for testing the smoke/heat sensors over and above just pressing the test button and ensuring that all alarms sound when doing so?

    Surely testing the functionality or otherwise of s smoke/heat detector is straying beyond our responsibilities under the wiring regulations? If not, then it should be outside scope in my view.
Reply
  • 0
    Agree with limiting I&T to the supply only.

    Similarly, fine to test fixed wiring for domestic smokes/heats, even to ensure continuity of interconnect core, but should we be responsible for testing the smoke/heat sensors over and above just pressing the test button and ensuring that all alarms sound when doing so?

    Surely testing the functionality or otherwise of s smoke/heat detector is straying beyond our responsibilities under the wiring regulations? If not, then it should be outside scope in my view.
Children
No Data

Community Rules & Guidelines