Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 51 replies
  • Subscribers 32 subscribers
  • Views 3684 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Lights Supplied by 30 Amp Ring Final. B.S. 3036 Fuse.

Zoomup
HellOOOoooo All,


I came across a strange one today. I went to change a faulty touch dimmer switch for an ordinary light switch. I discovered that the two lights controlled by the switch did not originate at the lighting circuit, but from a 30 Amp wire fused ring final. The supply was connected to an old metal double socket box below the light switch, in an added conservatory, with a blank plate over it. I can not add a fused connection unit as the box is a double socket box. The blank plate is covered by a small easily removed panel convector heater. I was considering installing an inline fuse holder in the double socket box for the lighting circuit. The lamps are low energy types so overloading is very unlikely, but faults may occur.


Thoughts please.


Z.
Parents
  • 0
    ebee:

    "Ignas Phillip Semmelweis comes to mind as being in a minority. He was bitterly opposed by the majority of his colleagues until Joseph Lister proved that his health claims were in fact correct. "


    Yes but did he have input into BS 7671?


    Perhaps not a direct input into the wiring regulations, BUT he may have saved the lives of early electrical pioneers, engineers and writers of early electrical safety requirements by his hygiene methods that saved many young lives. Their observations and engineering skills have been inherited by those following. He came just before the first wiring regulations of 1882.


Reply
  • 0
    ebee:

    "Ignas Phillip Semmelweis comes to mind as being in a minority. He was bitterly opposed by the majority of his colleagues until Joseph Lister proved that his health claims were in fact correct. "


    Yes but did he have input into BS 7671?


    Perhaps not a direct input into the wiring regulations, BUT he may have saved the lives of early electrical pioneers, engineers and writers of early electrical safety requirements by his hygiene methods that saved many young lives. Their observations and engineering skills have been inherited by those following. He came just before the first wiring regulations of 1882.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines