Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 33 replies
  • Subscribers 30 subscribers
  • Views 4769 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Wylex REC2SPD

Will Elec
Hi all,


I bought one of these for the first time today for a job I have coming up. I was suprised when I opened it up to find the SPD linked to the isolator by just 2.5mm wires, as these are the factory connection I guess this is the norm but I was suprised all the same! Why so small? I was expecting a copper busbar!


Thanks,

Will
Parents
  • 0
    I suppose if you cut a three pin section of busbar then cut the middle pin out to bridge past the centre terminal you could then trim the plastic shroud so it goes on the other way up to insulate the top of the busbar rather than the bottom.


    Installing the SPD with a couple of 6mm tri-rated insulated conductors with fork crimps on the main switch end in the balcony slots and the other ends in the SPD cage terminals seems a winner to me.


    Andy Betteridge.
Reply
  • 0
    I suppose if you cut a three pin section of busbar then cut the middle pin out to bridge past the centre terminal you could then trim the plastic shroud so it goes on the other way up to insulate the top of the busbar rather than the bottom.


    Installing the SPD with a couple of 6mm tri-rated insulated conductors with fork crimps on the main switch end in the balcony slots and the other ends in the SPD cage terminals seems a winner to me.


    Andy Betteridge.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines