Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 33 replies
  • Subscribers 30 subscribers
  • Views 4079 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

UKPN service head to smart meter - Advice and options?

Former Community Member
Former Community Member
Situation - first floor maisonette

UKPN Service head (60A fuse) TN-S is located in ground floor flat with no access for first floor.  Riser cables (VIR badly degraded) run inside brickwork up to another cutout fuse (60A).  Modern cables then loop into smart meter.  UKPN say they are not responsible for the riser - EDS 08-1103 section 6.1 - even though EPN as it was then installed it (although the cutout is theirs and technically only they are allowed to remove the fuse - my thoughts?).  UKPN won't pay for the work so that sits with the client unless anyone can tell me differently?

So, what's the best way to achieve this?  Need to upgrade the cable to 25mm2 (and probably ask to upgrade fuse to 100A) and it's not practical to start digging out the walls, not least because prolonged access to downstairs is not really an option.  Therefore external?  Best method/option?

Thanks in advance


Images - degraded VIR cable; upstairs cutout; downstairs service head
441e1955118398d5c372d5c581f9b1f4-huge-2021-03-08-11.11.21.jpg4d4b6764c4e77cfb446cace0ef9fb2cd-huge-2021-03-08-11.10.56.jpg
b96c361424b4d58634fc968632e95a41-huge-2021-03-08-17.06.50.jpg
Parents
  • Former Community Member
    0 Former Community Member
    Chris Pearson:
    Hicky59:

    The engineer hinted that they may just come, cut off the supply until it's sorted and tough luck on the client ...


    Hicky59, thank you for the clarification. Thank God it's the neutral rather than line which has an exposed conductor.


    That "riser" needs to be disconnected from the service head today.




    But who knows what's lurking inside the walls where we can't see ......?  As you said, I wouldn't want to give them a tug test ...


Reply
  • Former Community Member
    0 Former Community Member
    Chris Pearson:
    Hicky59:

    The engineer hinted that they may just come, cut off the supply until it's sorted and tough luck on the client ...


    Hicky59, thank you for the clarification. Thank God it's the neutral rather than line which has an exposed conductor.


    That "riser" needs to be disconnected from the service head today.




    But who knows what's lurking inside the walls where we can't see ......?  As you said, I wouldn't want to give them a tug test ...


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines