This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Repositioning non fire rated led kitchen spots.

As above,been asked move 6 spots due to new kitchen layout.The ceiling is single boarded with a bedroom above.

Just wondering if all fittings must be changed for fire rated.

                                                                         Regards,Hz

Parents
  • BS 7671 says that the the structure of the building and the fire safety provisions must not be compromised. 


    Cutting a hole in a plaster ceiling compromises the fire safety, not only does it permit the passage of fire it also allows smoke to pass.


    In addition it reduces the acoustic insulation and may compromise a vapour barrier.


    If the property requires a HMO licence the landlords would have to pay to have the floor coverings lifted over timber floors and have them over boarded with hardboard to stop smoke passing and that’s without any holes in the ceiling for down lights.


Reply
  • BS 7671 says that the the structure of the building and the fire safety provisions must not be compromised. 


    Cutting a hole in a plaster ceiling compromises the fire safety, not only does it permit the passage of fire it also allows smoke to pass.


    In addition it reduces the acoustic insulation and may compromise a vapour barrier.


    If the property requires a HMO licence the landlords would have to pay to have the floor coverings lifted over timber floors and have them over boarded with hardboard to stop smoke passing and that’s without any holes in the ceiling for down lights.


Children
No Data