Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 30 subscribers
  • Views 618 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

3 Phase Board Replacement

Former Community Member
Former Community Member
bbde2234199734238b313b2f5622eca8-huge-img_20210317_171001.jpgHi,


​​I was hoping I could glean some knowledge from you bright sparks.


I have a very old (and should be illegal) Federal Pacific 3 Phase Board that I am updating. It currently has 36 ways (with 2 Triple Pole and 30 Single Pole Breakers) with 3P 100a Disconnector.


There aren't many Boards that can fit that amount of outgoing ways, but I've find Europa Components do one.


Is it a case of switching old SP Breaker for new SP Breaker, and similarly for 3P Breaker.


I've attached a picture to hopefully help with your advice.


Thanks
Parents
  • 0
    The biggest problem with this board, is someone has butchered it to fit a different make of mcb at way 10. You won’t know how safely this has been done until you take the cover off. The door is also missing. 


    Regards,


    Alan.
Reply
  • 0
    The biggest problem with this board, is someone has butchered it to fit a different make of mcb at way 10. You won’t know how safely this has been done until you take the cover off. The door is also missing. 


    Regards,


    Alan.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines