Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 38 replies
  • Subscribers 32 subscribers
  • Views 3264 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BS7671 or Wiring Regulations?

UKPN
There is a guy on here asking "what is the point of the wiring regulations?" He hasnt explained his question, so I would like to expand a little.

If you pass the City and Guilds exam, you are awarded a certificate titled "BS7671 Requirements for Electrical Installations" The term "Wiring Regulations" is not on the sheet.

However, I note that most job requirements ask for 2391/2396/18th Wiring Regulations. Virtually no one talks in the context of " BS7671"

I am wondering if members can give me an idea how the two terms are related, who makes the decisions on "regulations" and who is accountable for those decisions. I have noted errors/confusion on various posts these last few days caused by ambiguity in those regulations and it seems the person who should be protected by these regulations (the customer) is the last to be considered.

Ever the cynic, is the term "wiring regulations" retained  for sentimental reasons or just to sell the book?

Thanks in advance.


Regards, UKPNZap


Parents
  • 0
    Chris Pearson:
     

    So the reason I didn't mention this, is that it only requires periodic verification to BS 7671, not full compliance (although that could be inferred by having to address defects, it could be debated that only "make safe" not "fully comply" is required).




    ESQCR 2002:

    Switched alternative sources of energy



    21.  Where a person operates a source of energy as a switched alternative to a distributor’s network, he shall ensure that that source of energy cannot operate in parallel with that network and where the source of energy is part of a low voltage consumer’s installation, that installation shall comply with British Standard Requirements.


    That's pretty wide - I wonder how many Standards would apply in addition to BS 7671?




    It's not as wide as the simple words of the particular Regulation would have you think -  have a look under Regulation 1(5), which defines "British Standards Requirements" as "the British Standard Requirements for Electrical Installations BS 7671"


    Interestingly, the ESQCR requires amending regularly, because when originally made, and at each amendment, a specific version of BS 7671 is cited.


Reply
  • 0
    Chris Pearson:
     

    So the reason I didn't mention this, is that it only requires periodic verification to BS 7671, not full compliance (although that could be inferred by having to address defects, it could be debated that only "make safe" not "fully comply" is required).




    ESQCR 2002:

    Switched alternative sources of energy



    21.  Where a person operates a source of energy as a switched alternative to a distributor’s network, he shall ensure that that source of energy cannot operate in parallel with that network and where the source of energy is part of a low voltage consumer’s installation, that installation shall comply with British Standard Requirements.


    That's pretty wide - I wonder how many Standards would apply in addition to BS 7671?




    It's not as wide as the simple words of the particular Regulation would have you think -  have a look under Regulation 1(5), which defines "British Standards Requirements" as "the British Standard Requirements for Electrical Installations BS 7671"


    Interestingly, the ESQCR requires amending regularly, because when originally made, and at each amendment, a specific version of BS 7671 is cited.


Children
No Data

Community Rules & Guidelines