You can no longer post new replies to this discussion. If you have a question you can start a new discussion
Contactor to DOL starter & switches
Former Community Member
I have a DOL starter (https://docs.rs-online.com/c08c/0900766b81586106.pdf for reference) that I want to connect to my ac motor. I understand that the dol starter has a built-in contactor. I want to connect two other switches, a tilt and a proximity switch. Is it possible to connect these two switches to this DOL? If not how would I go about this?
My aim with the two additions switches is that, if either the proximity or tilt detects an object close by or detects a tilt, then it would turn off the motor. That's my idea. I'm not sure if it is possible, but I thought I would ask. This is a small project I'm undertaking so the motor isn't really doing anything useful.
My aim with the two additions switches is that, if either the proximity or tilt detects an object close by or detects a tilt, then it would turn off the motor. That's my idea. I'm not sure if it is possible, but I thought I would ask. This is a small project I'm undertaking so the motor isn't really doing anything useful.
