Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 32 subscribers
  • Views 3356 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

S.W.A. Cables in Parallel.

Zoomup
I have installed two 3 core 6.0mm2 S.W.A. cables in parallel for ease of installation, fused at 60 Amps.  The run is about 20 metres. They are single phase connected. I use Brown as L, Black tagged blue as N and grey oversleeved green and yellow as C.P.C. in each cable.


I have bonded the armour at each end and it is earthed at the origin of the circuit.


I have a niggling feeling that I have missed something. Is the above o.k?


Z.
Parents
  • 0
    alanblaby:


    Twin 6mm 3 cores?

    It would be far easier to run one 2 core 10mm, or even 1 x 2 core 6mm if clipped direct.

    This is basic stuff.


    Some wholesalers do not stock two core S.W.A. where 3 core is more popular. The 3 core was sold at the 2 core price.


    Would you run a 2 core 6.0mm2 S.W.A protected by a 60 Amp fuse?


    Z.


     


Reply
  • 0
    alanblaby:


    Twin 6mm 3 cores?

    It would be far easier to run one 2 core 10mm, or even 1 x 2 core 6mm if clipped direct.

    This is basic stuff.


    Some wholesalers do not stock two core S.W.A. where 3 core is more popular. The 3 core was sold at the 2 core price.


    Would you run a 2 core 6.0mm2 S.W.A protected by a 60 Amp fuse?


    Z.


     


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines