Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 28 replies
  • Subscribers 32 subscribers
  • Views 4079 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Terminating Twin and Earth

nicemark
I have been arguing about the methods of separating out the ends of twin and earth cable.


An old accepted trade method was to simply grip the earth wire and tear it out of the insulation to split the ends open.

However this puts considerable strain on the earth wire and in the case of 1mm wire it is very easy to stretch a significant amount. 


I was wondering if you there is data or evidence to demonstrate that this method is not acceptable. 

Parents
  • 0
    I have never bothered trying to get the earth cable out, takes far too long . just a snip down between the 2 outer core and earth, grabbing the outer core in the same movement and pull the outer core down. Stripped in a couple of seconds. Never had a problem in 30 odd years.



    Gary
Reply
  • 0
    I have never bothered trying to get the earth cable out, takes far too long . just a snip down between the 2 outer core and earth, grabbing the outer core in the same movement and pull the outer core down. Stripped in a couple of seconds. Never had a problem in 30 odd years.



    Gary
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines