Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 295 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Earth rod used in pme installation.

hertzal123
Came across an earth rod in the concrete floor of a rural garage.The Ra was 115 ohms.

Just wondering how effective in loss of neutral this would be.Most pipework was plastic,

so no mpb.Thanks for any opinions.

                                   Regards,Hz
Parents
  • 0
    seconded - perhaps if it lit low wattage warning light between it and neutral, or if there is an RF reason for grounding.

    Perfeclty ok for tripping an RCD on a TT island of course, but utterly defeated if you connect the PEN derived TNCs earth to it.


    As a carrier of significant fault currents you are not doing much better than you would with a rod in a flowerpot on the windowsill....

    mike.

Reply
  • 0
    seconded - perhaps if it lit low wattage warning light between it and neutral, or if there is an RF reason for grounding.

    Perfeclty ok for tripping an RCD on a TT island of course, but utterly defeated if you connect the PEN derived TNCs earth to it.


    As a carrier of significant fault currents you are not doing much better than you would with a rod in a flowerpot on the windowsill....

    mike.

Children
No Data

Community Rules & Guidelines