Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 1808 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Meter Tails.

Zoomup
You go to renew an old consumer unit. The Meter is in an outside wall box and the 16.0mm2 tails run in the cavity to a Henley block in the house nearby, where the consumer unit is located at high level. It is impossible to easily install new 25mm2 tails. There is no sign of overheating or damage at all. Do you just run your new 25mm2 tails from your new consumer unit to the Henley block or what? The main fuse must be a 100 Amp fuse as the house has storage heating, also supplied via 16.0mms tails which are in good condition.


Z.
Parents
  • 0
    It is impossible to easily install new 25mm2 tails.

    You clearly don't own a big enough hammer!


    (After that, it becomes possible, you just have to refine the actual method to something acceptable).


      - Andy.
Reply
  • 0
    It is impossible to easily install new 25mm2 tails.

    You clearly don't own a big enough hammer!


    (After that, it becomes possible, you just have to refine the actual method to something acceptable).


      - Andy.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines