Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 32 subscribers
  • Views 637 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Internal inspection of sockets and switches.

hertzal123
Some years ago on doing some remedials on a report,I noticed the inspector had put "internal inspection of selected

sockets and switches".Wondered if this is acceptable instead of giving a percentage of the inspections?

                                                                                                            Regards,

                                                                                                                     Hz
Parents
  • 0
    It appears that item 5.17 on the Condition Report Inspection Schedule requires only an indication of the “extent” of sampling but if you look on page 479 under termination of cables at enclosures it suggests identifying numbers and locations.

    I think the key point should be to minimise bureaucracy and focus on the inspection activity. Of course that will rely on the integrity of the inspector!
Reply
  • 0
    It appears that item 5.17 on the Condition Report Inspection Schedule requires only an indication of the “extent” of sampling but if you look on page 479 under termination of cables at enclosures it suggests identifying numbers and locations.

    I think the key point should be to minimise bureaucracy and focus on the inspection activity. Of course that will rely on the integrity of the inspector!
Children
No Data

Community Rules & Guidelines