Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 31 subscribers
  • Views 2032 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Ze readings on a TT system

Former Community Member
Former Community Member
Hi

I have a TT system on a farm where the ze readings are

L1 = >2000

L2 = 1.43

L3 = 1.41

readings took at the henley blocks directly from the meter. There's voltage on L1 and all the 3 phase equipment runs OK.

can anyone tell me why I'm getting this high reading.


Many thanks

BR
Parents
  • 0



    There is something about zeroing the meter before carrying out a loop test in the instructions. Also the meter may not work if overheated due to being overused.


     I am currently reading through the user's manual. 

    Fluke1651_User.pdf (tlc-direct.co.uk)


    Z.
Reply
  • 0



    There is something about zeroing the meter before carrying out a loop test in the instructions. Also the meter may not work if overheated due to being overused.


     I am currently reading through the user's manual. 

    Fluke1651_User.pdf (tlc-direct.co.uk)


    Z.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines