Grumpy:mapj1:
If the cooker to be undone is on a plug-in gas hose, anyone can disconnect it, as the gas act specifically calls that up as not being gas work.
You do need to fit a blanking plug into the bayenet socket though if you intend to leave it disconnected.
Not the case here I realise as this cooker is apparantly hard piped which is unusual.
I thought that the bayonet type gas connectors were self sealing. Isn't a blanking plug as bad as socket covers?
Gas Cooker Straight Bayonet Socket | eSpares
Z.
Grumpy:mapj1:
If the cooker to be undone is on a plug-in gas hose, anyone can disconnect it, as the gas act specifically calls that up as not being gas work.
You do need to fit a blanking plug into the bayenet socket though if you intend to leave it disconnected.
Not the case here I realise as this cooker is apparantly hard piped which is unusual.
I thought that the bayonet type gas connectors were self sealing. Isn't a blanking plug as bad as socket covers?
Gas Cooker Straight Bayonet Socket | eSpares
Z.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site