The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Eddy Currents and Non Ferrous Metals.

Eddy currents can be induced in non-ferrous metals as demonstrated here.....(These currents produce magnetic fields which interact with each other)........

https://www.youtube.com/watch?v=Yu1uRvErM80


Z.
Parents
  • mapj1:

    We can call eddy currents that if you like,  but please note,  it  is not currents that the lines on your diagram represent.

    The lines in the diagram are magnetic fields, quite a different thing, and at right angles to the current.

    Both the driving currents, and any induced Foucault  currents associate with those lines of magnetic field are entirely out of the plane of the screen.


    Mike


    * (magnetic field lines tell you the pointing direction of an imaginary small compass, lines of current are about moving electric charges . This was not fully fixed in 1898 you may do marginally better with Electricity and Magnetism by Bleaney and Bleaney 1957 vol 1. however it is not a light read.).


    Yes Mike I know that the lines are magnetic "flux" or "field." it is these that create the unwanted eddy currents that can cause problems and energy wastage. My McKenzie Smith & Hosie book of the 70s entitled Basic Electrical Engineering Science says: "If a loop of conducting material is linked by a varying flux, an E.M.F.  is induced in the loop and a circulating current will flow round the loop. The current in the loop is termed an eddy current. The eddy current flows around a path of one turn which is effectively a short circuit.  "I am not disputing the arrangement of the parts of this process. The film about electromagnetic waves was very interesting. Thanks Mike.


    Z.


     


Reply
  • mapj1:

    We can call eddy currents that if you like,  but please note,  it  is not currents that the lines on your diagram represent.

    The lines in the diagram are magnetic fields, quite a different thing, and at right angles to the current.

    Both the driving currents, and any induced Foucault  currents associate with those lines of magnetic field are entirely out of the plane of the screen.


    Mike


    * (magnetic field lines tell you the pointing direction of an imaginary small compass, lines of current are about moving electric charges . This was not fully fixed in 1898 you may do marginally better with Electricity and Magnetism by Bleaney and Bleaney 1957 vol 1. however it is not a light read.).


    Yes Mike I know that the lines are magnetic "flux" or "field." it is these that create the unwanted eddy currents that can cause problems and energy wastage. My McKenzie Smith & Hosie book of the 70s entitled Basic Electrical Engineering Science says: "If a loop of conducting material is linked by a varying flux, an E.M.F.  is induced in the loop and a circulating current will flow round the loop. The current in the loop is termed an eddy current. The eddy current flows around a path of one turn which is effectively a short circuit.  "I am not disputing the arrangement of the parts of this process. The film about electromagnetic waves was very interesting. Thanks Mike.


    Z.


     


Children
No Data