This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Bathroom heating lights

What do electricians think of bathroom heating lights?

They are the highest power devices normally connected to a lighting circuit. Many years ago I had one with a 750W heating element. Combine this with a 100W incandescent bulb and you have a device which consumes 3.7A. Two of these devices will overload a 6A lighting circuit.

Should heating lights be designed in a way to easily connect the heating element to a different circuit than that used for the light? Alternatively, should they be powered from a ring main rather than a lighting circuit?

Parents
  • Jaymack: 
    The principle is wrong, relying on such inefficient, radiant heat; rather think of fan heating in the space behind an enclosed panel below a bath say or floor heating.

    IMHO, they are ugly, but I wouldn't go so far as to say that the principal is wrong. They are only intended to provide a bit of comfort whilst drying oneself. An old-fashioned radiant wall heater is just as good, but don't forget the supplementary bonding!

Reply
  • Jaymack: 
    The principle is wrong, relying on such inefficient, radiant heat; rather think of fan heating in the space behind an enclosed panel below a bath say or floor heating.

    IMHO, they are ugly, but I wouldn't go so far as to say that the principal is wrong. They are only intended to provide a bit of comfort whilst drying oneself. An old-fashioned radiant wall heater is just as good, but don't forget the supplementary bonding!

Children
No Data