The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 31 subscribers
  • Views 2798 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

MCBs and MCCBs in the sub main Distribution Board

Nick Parker

I have a sub main distribution board which feeds the final distribution boards and 10's of individual loads.

Now considering that I have an option of applying both MCBs and MCCBs as the outgoing circuit breakers.

MCBs - Standard ratings are available from 0.5A to 80A.

MCCBs - Standard ratings are available from 0.5A till 2500A.

Can I have a mix of MCB and MCCBs as the outgoing breakers in the overlapping area till 80A? (In otherwords, for loads upto 80A, MCB will be used and above which MCCB will be used).

Note that prospective fault current at the sub main is less than 20kA. At 20kA both MCBs and MCCBs are available.

I'm sure many would have used this configuration. Are there any cons with this arrangement?

 

 

 

 

 

Parents
  • 0

    Is this a real design or a student job? MCCBs are much more expensive than MCBs, can have many more features, and may not be suitable for other or discrimination reasons. They are not normally available to fit in the same enclosures as MCBs, so final circuits will have their own distribution board. What is the submain rating and what are the outgoing circuit ratings?

Reply
  • 0

    Is this a real design or a student job? MCCBs are much more expensive than MCBs, can have many more features, and may not be suitable for other or discrimination reasons. They are not normally available to fit in the same enclosures as MCBs, so final circuits will have their own distribution board. What is the submain rating and what are the outgoing circuit ratings?

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines