Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 30 subscribers
  • Views 6602 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

EIC "rated time delay" value for a 61008 type-s

psychicwarrior

good day folks

 

out of interest, if anyone has filled in the “rated time delay” entry on an EIC for a 61008 type-s RCD main switch,  what was the value  (presuming the standard has a set value/range)  used and where from ?

 

regards

Habs

 

Parents
  • 0

    re: the table posted by @mapj -

    is the ‘non-actuating’ value effectivel ythe  max. allowed ‘delay’, so that for example, 130ms is the max delay that can be applied at Idn?

     

    edit: to answer my own question, “no it isn't”  as it appears to be the trip time range  that is in BS7671.  

Reply
  • 0

    re: the table posted by @mapj -

    is the ‘non-actuating’ value effectivel ythe  max. allowed ‘delay’, so that for example, 130ms is the max delay that can be applied at Idn?

     

    edit: to answer my own question, “no it isn't”  as it appears to be the trip time range  that is in BS7671.  

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines