Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 30 subscribers
  • Views 6605 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

EIC "rated time delay" value for a 61008 type-s

psychicwarrior

good day folks

 

out of interest, if anyone has filled in the “rated time delay” entry on an EIC for a 61008 type-s RCD main switch,  what was the value  (presuming the standard has a set value/range)  used and where from ?

 

regards

Habs

 

Parents
  • 0

    100 Amp 100mA Time Delayed RCD 2 Pole - Wylex

    5013601017570

    WRMT100/2

    product photo

     

    RCD terminal capacity,
    35 mm

    Wylex
    100A 100mA Time Delayed RCD
    2 Pole

     

    100mA time delay

    Suitable for use when total RCD protection is required to supplement
    the system earthing and where local 30mA RCDs are used to give
    additional protection against direct contact.

    The time delay RCD will discriminate with the 30mA RCD.

    Wylex
    • All Wylex RCDs incorporate a filtering device to provide protection against transient surges in the supply to the unit, thus reducing the occurrence of unwanted tripping.
    • Wylex RCDs must never be used as the sole method of direct contact protection, but are invaluable in providing supplementary protection in high risk environments where damage may occur.
    • The operating dolly may be locked in either the ON or OFF position without affecting the ability of the trip mechanism to operate, i.e. the RCD is 'trip-free'. It is not possible to hold the contacts closed when a fault condition exists.
    • When in the OFF position a contact gap of 4 mm is present, enabling Wylex RCDs to be used as isolating switches where appropriate.
     

    Technical:

    RCD Selection and Info Data Sheets

    Product Code

     

    Description

     

    Price (ex VAT)

     

    Quantity

     

    WY WRMT100/2

    100 Amp 100mA Time Delayed RCD 2 Pole - Wylex

     

     

    EACH

     

    £42.60

     

    Add

    Well, if the S type is slower in operation than 30mA instant types downstream, who cares about the actual trip time. As long as it is slower than say 40mS or longer?

    Z.

     

     

Reply
  • 0

    100 Amp 100mA Time Delayed RCD 2 Pole - Wylex

    5013601017570

    WRMT100/2

    product photo

     

    RCD terminal capacity,
    35 mm

    Wylex
    100A 100mA Time Delayed RCD
    2 Pole

     

    100mA time delay

    Suitable for use when total RCD protection is required to supplement
    the system earthing and where local 30mA RCDs are used to give
    additional protection against direct contact.

    The time delay RCD will discriminate with the 30mA RCD.

    Wylex
    • All Wylex RCDs incorporate a filtering device to provide protection against transient surges in the supply to the unit, thus reducing the occurrence of unwanted tripping.
    • Wylex RCDs must never be used as the sole method of direct contact protection, but are invaluable in providing supplementary protection in high risk environments where damage may occur.
    • The operating dolly may be locked in either the ON or OFF position without affecting the ability of the trip mechanism to operate, i.e. the RCD is 'trip-free'. It is not possible to hold the contacts closed when a fault condition exists.
    • When in the OFF position a contact gap of 4 mm is present, enabling Wylex RCDs to be used as isolating switches where appropriate.
     

    Technical:

    RCD Selection and Info Data Sheets

    Product Code

     

    Description

     

    Price (ex VAT)

     

    Quantity

     

    WY WRMT100/2

    100 Amp 100mA Time Delayed RCD 2 Pole - Wylex

     

     

    EACH

     

    £42.60

     

    Add

    Well, if the S type is slower in operation than 30mA instant types downstream, who cares about the actual trip time. As long as it is slower than say 40mS or longer?

    Z.

     

     

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines