Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 34 subscribers
  • Views 276 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Electrical CAD

Derek Eccles

I am hoping to buy software to assist with electrical design in the water industry. I would like to not only do the design but to generate the corresponding test and inspection (NICIEC) tables / certificates. 

A few years ago I came across Amtech, which since has been re-branded, that seemed a good application, the only thing it did not have was a module for generating the NICIEC certificates.

In a lot of cases the electrical design includes the sizing of cables and protective devices for plant and equipment installed in the field. There is usually one large control panel / board feeding plant and equipment, which could be upto 100m away.

Any suggestions would be most welcome.

Thanks, Derek 

Parents
  • 0

    Derek

    Have a look at the top of this thread. Modecsoft would appear to meet all your needs. A lot cheaper than Trimble/Amtech and a lot more helpful when requesting advice. Some useful demonstrations on You Tube.

     

Reply
  • 0

    Derek

    Have a look at the top of this thread. Modecsoft would appear to meet all your needs. A lot cheaper than Trimble/Amtech and a lot more helpful when requesting advice. Some useful demonstrations on You Tube.

     

Children
No Data

Community Rules & Guidelines