The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 8093 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Trying to understand Dali Lighting system

newbieuser

So a DALI system is a ‘smart’ lighting system with different options of setting groups, dimming changing temperature etc. 

In a simple Dali system, where a set of of led lights are dimmed is this how it would get wired/connected. 

The main Lighting control module (dali) gets fed the incoming supply from local DB. Then the  cables connect from the LCM to the indivudal dali ballast of the lights. Then control wires go to the switches and/or PIR sensors. Then the retractive switch can be used to dim the lights?

Does it require any specific swtiches ?

Thanks.

Regards,

Sam

Parents
  • 0

    in a word, yes  it does. Every switch, dimmer, light fitting, LED or tube driver, has to be on the bus and have a unique address, and so has the controller.  There are also DALI adressable relays for the control  of non DALI devices.

    The controller can be thought of as a bit like a telephone exchange - when the signal comes in that switch no 123 has changed state, the controller looks up its settings and then sends the command to turn on lamp no 37 or whatever it is associated with. 

    But it gets better - the controller can be programed to do things based on clock times as well, or in response to external commands (internet/ over phone lines etc) so perhaps turn off all the lights in the office after midnight, or maybe every second one…  or to switch something on before folk get in - it does not have to be just lights… most sorts have options to allow them to be reprogrammed from afar.

    If it is not programmed properly it can be very confusing. When it works well it is impressive. If it gets hacked it can take ages to untangle..

    The DALI bus lines are low voltage but neither PELV nor SLEV, and can be wired and routed alongside the mains.

     

     

Reply
  • 0

    in a word, yes  it does. Every switch, dimmer, light fitting, LED or tube driver, has to be on the bus and have a unique address, and so has the controller.  There are also DALI adressable relays for the control  of non DALI devices.

    The controller can be thought of as a bit like a telephone exchange - when the signal comes in that switch no 123 has changed state, the controller looks up its settings and then sends the command to turn on lamp no 37 or whatever it is associated with. 

    But it gets better - the controller can be programed to do things based on clock times as well, or in response to external commands (internet/ over phone lines etc) so perhaps turn off all the lights in the office after midnight, or maybe every second one…  or to switch something on before folk get in - it does not have to be just lights… most sorts have options to allow them to be reprogrammed from afar.

    If it is not programmed properly it can be very confusing. When it works well it is impressive. If it gets hacked it can take ages to untangle..

    The DALI bus lines are low voltage but neither PELV nor SLEV, and can be wired and routed alongside the mains.

     

     

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines