Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 47 replies
  • Subscribers 32 subscribers
  • Views 6020 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Consumer units and equipment outdoors

vantech

Hi,

Anything inherently wrong with installing consumer units outside? 

IP rated (IP65/66).

The plan is to install henley blocks into the exterior meter cupboard, and a supply taken to an IP rated lockable enclosure on the wall directly below the cupboard to supply an outbuilding.  

How does the sway in temperature impact MCB and RCD functionality? They all seem to be rated to sub zero temperatures and in excess of 40 degrees. 

Anyone with any extensive experience doing this? 
 

Thanks. 

Parents
  • 0

    Zoomup,

    Regarding the Masterseal units you indicated:

    Its very clear units are IP66 rated so completely dust tight and protection against jets of water, so please explain how you drilling “ one or two holes” in the bottom of the back box would keep that manufacturers rating? 

    GTB

Reply
  • 0

    Zoomup,

    Regarding the Masterseal units you indicated:

    Its very clear units are IP66 rated so completely dust tight and protection against jets of water, so please explain how you drilling “ one or two holes” in the bottom of the back box would keep that manufacturers rating? 

    GTB

Children
No Data

Community Rules & Guidelines