Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 37 subscribers
  • Views 716 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Garage door motor

Tomgunn

Hi all. I should be moving house, very soon. The new house has a garage door but I want to attach a door opener to it. I have fitted many garage doors, and repaired the openers' too. I used to use CAME for operating gates and they were ok, good helpline as well!

Thing is... what type to buy? Any suggestions on make and any problems I could be facing? 

Can it be attached to any garage door etc?

I had a lot of feedback, when I asked about generators' and I HOPE that the page will still be there, on the old forum BUT, either way I will be posting what I have found out to be the way for me to install one, when I move.

regards...

Parents
  • 0

    Is this an up-and-over metal door, or a roller door please? Or something else?

Reply
  • 0

    Is this an up-and-over metal door, or a roller door please? Or something else?

Children
  • 0 in reply to Chris Pearson

    Hello Chris. Good question!!! It's an up, and over, door. 

    IF, I move there I will let you all see what I will do with a generator, (using your feedback some months' ago as my guide). There is a 6mm / 10mm SWA, (you can just see the SWA beneath the window... coiled and ready to go, running from behind the garage, (used for a 'hot-tub' now disconnected. The owner is an electrical contractor and the wiring / tubing, in the garage, is amazing what he had his apprentice install!!), to the front of the house so, that could be used for the generator supply. Obviously, I'll cover this later.

    Thanks, regards.

Community Rules & Guidelines