New apartment block of 12 units with 18 associated parking spaces. The contractor has brought a 80A TPN supply from the intake position to a new DB in fibreglass housing mounted on a steel frame near the car park. Ducting has been laid to 9 points to provide for twin sockets that will cover all spaces if necessary. The intention is to provide a DLM (dynamic load management) system such that the 80A per phase will never be exceeded and priority can be set. The units will have RFID that will allow billing.
Part S does not apply, but suppose it did, also suppose that at least 12 points were required, would this be an acceptable arrangement given that each charge point is supposed to provide at least 7Kw?
by the way, using IPad, I could not get the cursor back to correct or modify what I have just written!
