Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 42 subscribers
  • Views 3238 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Garden room electrics

MikeD

I'm planning to batten the interior of the garden room I'm building and line it with 6mm WBP plywood with the cables in the void behind.

Can I fit flush mounting mains sockets to the plywood or does this contravene a fire safety regulation?

Mike

Parents
  • 0

    Bear in mind that if the cables are embedded on or in the insulation, then their current-carrying capacity gets reduced (sometimes quite significantly).

  • 0 in reply to wallywombat

    Yes I understand that, but the insulation is sandwiched between the OSB while the cables are on the surface.

    From what I've just read, providing the joints between the SIPs are properly sealed a vapour control layer isn't needed.

    Mike

Reply
  • 0 in reply to wallywombat

    Yes I understand that, but the insulation is sandwiched between the OSB while the cables are on the surface.

    From what I've just read, providing the joints between the SIPs are properly sealed a vapour control layer isn't needed.

    Mike

Children
No Data

Community Rules & Guidelines