Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 38 subscribers
  • Views 761 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hole and Notches in close proximity

RustyH

Are there any regs relating to drilling a new hole below an existing notch. 

Regs only seem to define the span criteria, and I can not see any guidance in Part P. 

It would seem logical to me to offset any hole a set distance from a notch, but drilling a hole below a notch equally seems compliant? 

Parents
  • 0

    Rule no. 1: use an existing hole (or notch) if you can.

    Holes should be 3 diameters apart (centre to centre, so 2 diameters between) so it would seem wise to keep the same spacing from a notch.

Reply
  • 0

    Rule no. 1: use an existing hole (or notch) if you can.

    Holes should be 3 diameters apart (centre to centre, so 2 diameters between) so it would seem wise to keep the same spacing from a notch.

Children
No Data

Community Rules & Guidelines