Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 38 subscribers
  • Views 761 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hole and Notches in close proximity

RustyH

Are there any regs relating to drilling a new hole below an existing notch. 

Regs only seem to define the span criteria, and I can not see any guidance in Part P. 

It would seem logical to me to offset any hole a set distance from a notch, but drilling a hole below a notch equally seems compliant? 

Parents
  • 0

    My Avatar picture thingy is taken as such a silly example, I rewired and did the holes, put cables in then a few days later the joists were butchered by the heating installers, every single joist where I`d put mee cables within recommended span. Silly ???

Reply
  • 0

    My Avatar picture thingy is taken as such a silly example, I rewired and did the holes, put cables in then a few days later the joists were butchered by the heating installers, every single joist where I`d put mee cables within recommended span. Silly ???

Children
No Data

Community Rules & Guidelines