Rules and Guidelines

Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

State Not Answered
Locked Locked
Replies 7 replies
Subscribers 38 subscribers
Views 927 views
Users 0 members are here

Options

You may also be interested in

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help please.

Zoomup over 3 years ago

Is a Chint NHB2100UK just a 100 Amp D.P. switch?

Thanks,

Z.

Parents

0 mapj1 over 3 years ago

If you are using Chint gear, then this slightly dated article may amuse,

Schneider paying Chint 23million dollars to compensate for patent infringements

Not always do the new ideas come from Europe it seems.

Mike
Cancel
Vote Up 0 Vote Down

Cancel
0 ebee over 3 years ago in reply to mapj1

Crikey
Cancel
Vote Up 0 Vote Down

Cancel
0 Zoomup over 3 years ago in reply to mapj1

I am not using Chint gear at this address Mike, but I discovered one of these devices by the meter recently, connected to tails that were over 3 metres long.

Z.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Zoomup over 3 years ago in reply to mapj1

I am not using Chint gear at this address Mike, but I discovered one of these devices by the meter recently, connected to tails that were over 3 metres long.

Z.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 mapj1 over 3 years ago in reply to Zoomup

That would be protected by the DNO fuse - BS7671 would be OK with a 100A bs88 or 1361 type fuse and far longer tails but, if that is OK or not, well that would be an ecumenical matter, no sorry at the whim of the DNO.

Which means maybe not ;-) Mike
Cancel
Vote Up 0 Vote Down

Cancel