This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Street lighting control

Does anyone have an insight into how Councils control street lights? My client is a residents association in a private road just off a Lincolnshire County Council public highway. They have seven street lights in the private road, each appears to have a single feed to them and there is no (apparent) control box for them - it appears their street lights are fed from the public highway (unless I am missing something). In the middle of the night the public highway lights get turned off, but those on the private road do not.  I have been asked to quote for providing a timer(s) for the lights  in the private road - in my opinion the installation cost and inconvenience in the event of power cuts does not justify this approach - am hoping they can be included in whatever switching on/off the Council do. Any pointers please on who to speak to to see if the private road lights can also be controlled by the Council?

Parents
  • Have looked into this a bit further - thank you for all who have responded. I do think there is a photocell on the lamp head - photo is not entirely clear though. It seems that Lincolnshire county council might charge £300 per lamp (2019 prices) to convert them to be controlled by radio signal, and that is assuming they might also take on responsibility for the lights in future, which is not guaranteed. I am now considering if I can squeeze in a Sangamo 72101 timer in an enclosure at the base, though space is tight!

     

  • Will the Sangamo timer be happy in a lamp post column? It may need a drip proof enclosure. What happens after a power cut? Will it retain its settings and time?

    Z.

  • I do think there is a photocell on the lamp head - photo is not entirely clear though.

    It doesn't look like there is a photocell attached to these lanterns but it's difficult to confirm.

    One other solution (which might be a long shot) is that the lanterns are fitted with a pre-programmed ballast with factory set on/off times. This would explain the lack of control device in the column base or on the lantern. I used to program quite a few ballasts like this around 8 years ago so there are certainly a few out in the wild!

    Either way, best way to confirm is a full inspection of the lantern.

Reply
  • I do think there is a photocell on the lamp head - photo is not entirely clear though.

    It doesn't look like there is a photocell attached to these lanterns but it's difficult to confirm.

    One other solution (which might be a long shot) is that the lanterns are fitted with a pre-programmed ballast with factory set on/off times. This would explain the lack of control device in the column base or on the lantern. I used to program quite a few ballasts like this around 8 years ago so there are certainly a few out in the wild!

    Either way, best way to confirm is a full inspection of the lantern.

Children
No Data