Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Locked Locked
  • Replies 11 replies
  • Subscribers 34 subscribers
  • Views 1402 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Blanking Plate Challenge.

Zoomup

I had to fit a double blanking plate today over an old metal box. The socket was like this with four securing screws. I imagined that I would have to drill at least two if not four holes accurately in the new blanking plate but>>>>>>>>>>>>>>>>>the answer presented itself. How?

Parents

  • in reply to Zoomup

    Using the existing two holes in the blanking plate as guides you drilled and tapped the back box and secured it with longer screws.

  • in reply to Zoomup

    Drill holes in the back of the box into the brickwork, pop in a couple of rawlplugs, and use wood screws.

Reply
  • in reply to Zoomup

    Drill holes in the back of the box into the brickwork, pop in a couple of rawlplugs, and use wood screws.

Children

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines