Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Locked Locked
  • Replies 11 replies
  • Subscribers 34 subscribers
  • Views 1400 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Blanking Plate Challenge.

Zoomup

I had to fit a double blanking plate today over an old metal box. The socket was like this with four securing screws. I imagined that I would have to drill at least two if not four holes accurately in the new blanking plate but>>>>>>>>>>>>>>>>>the answer presented itself. How?

Parents Reply
  • in reply to sparkiemike

    So it is!

    Never occurred to me that Zoomy might have more than one post . . . Rolling eyes 

Children
  • in reply to Grumpy

    Yep, I found that the metal box in the wall did in fact have six lugs. So I used the two previously unused lugs for the new blanking plate. M.K. must have anticipated the use of the new two screw sockets whilst the four screw sockets were still in use.

    Z.

  • in reply to Zoomup

    Yes there were quite a few six hole back boxes installed a few years back and it did prove quite ago idea from the installer`s perspective

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines