Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 39 subscribers
  • Views 3499 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

How are hand wires in toilets wired up?

johnwicklover

So how are hand dryers usually wired in a radial circuit?

Is the supply cable from consumer board connected to supply side of a FCU and then the load side connected to wago connectors (L and N have their own connectors). Then hand dryer connected to the wago connectors. Then a second FCU is connected to the wago connector and the load side of second FCU  connected to the Hand dryer.

Thanks.

Parents
  • 0

    I am not trying to be rude but get somebody competent to do it.

    Gary

Reply
  • 0

    I am not trying to be rude but get somebody competent to do it.

    Gary

Children
  • 0 in reply to aligarjon

    That was quite rude Gary! I'll give you that it was a bit of a scary question but if you don't ask you don't learn.

    I shudder to think of the brainless enquiries I've made over the years.

  • 0 in reply to Grumpy

    As i said i don't want to sound rude but the OP sounds confused to say the least. Better to learn from someone that knows what they are doing. I  personally pick things up far easier when watching someone rather than being told although i appreciate we aren't all the same.

    Gary

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines