Hi all,
Planning some CPD and wondered if anyone had any recommendations for courses, formal or otherwise, covering either of the above? Not planning to be a fire engineer or a MCC designer, but I could do with a better foundation.
Jam
Hi all,
Planning some CPD and wondered if anyone had any recommendations for courses, formal or otherwise, covering either of the above? Not planning to be a fire engineer or a MCC designer, but I could do with a better foundation.
Jam
Why not dig it out yourself for free rather than pay for some gift wrapped material?
Intruder Alarms, a real pain to learn about. I did an Honeywell Course once. To say it was basic was being kind. Finding someone to teach about alarms is somethng I've never seen. It seems you learn about these with on the job training, and reading through the 300 page manufacturers instructions (one of the Honeywell Commercial alarms has a 400 page handbook.)
Fire Detection is possible on your own, but, a copy of 5839 is something ridiculous like £3000.
The FIA do a series of courses, I did look into doing some, but other things got in the way, and I dont think I would benefit much from it now at my age, though it would be nice to know.
I've recently took a turn in direction, and learning about ASHP's and their design, TBH, I'm enjoying it, some of it is quite difficult to grasp, but I see a big future for them, and with the cowboys out there grabbing the Government Grants, and doing a poor install, there is going to be a market for fault finding and system optimisation.
Hi Jam
The Practical Guide to Grade-D Fire Alarm Systems: BS5839 - 6: 2019 Updated to Amd 1: 2020
by Tim Benstead (Author)
might be worth a read
If you get yourself a copy of BS 5839-1 then you'll find it a lot easier to read than most standards.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site