Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Replies 8 replies
  • Subscribers 15 subscribers
  • Views 604 views
  • Users 0 members are here
Options
You may also be interested in

HV Safety advice required

E95

Hi, 

Contemplating the safest way to carry out a HV switching program

We're carrying out function checks of an existing 11kV VCB, we have two options:

  1. Switch off, rack out into a test position (only control voltage applied) and manually operate on a dead system, and then rack back into the live connections or:
  2. Switch the downstream load off, so the circuit is energised with no load and perform manual switching in front of the energised VCB

Personally I see both as having pitfalls, however I am uncertain whether manually switching 11kV VCB under no load is safer than racking into and out of live busbars

Any other important considerations to be taken into account?

Regds

Parents

  • Switch off, rack out into a test position (only control voltage applied) and manually operate on a dead system, and then rack back into the live connections

  • in reply to Dave Tennyson

    Thanks Dave, however is racking into and out of the live connections not a hazard in itself? 

    Why would this be less hazardous than switching live voltage onto the no load connections ?

Reply
  • in reply to Dave Tennyson

    Thanks Dave, however is racking into and out of the live connections not a hazard in itself? 

    Why would this be less hazardous than switching live voltage onto the no load connections ?

Children

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines