The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 31 subscribers
  • Views 4490 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • Former Community Member
    0 Former Community Member
    Thanks for the reply.

    Please find attached the original installation schema.

    I believe the windows are in the diagram are designed to be installed in series in blocks of 2 or 3 - our original electrician wasn't really happy with this and installed a connection to each pane independently back to the control board (I'll take a photo of that and post).

    The original brief was that the downstairs and upstairs where seperated so that we could just have 1 section working if necessary (which they obviously aren't). I am more bothered about getting the upstairs working as we have UFH downstairs.

    If anyone can shed any light / has any ideas etc it would be much appreciated.


    Thanks.
Reply
  • Former Community Member
    0 Former Community Member
    Thanks for the reply.

    Please find attached the original installation schema.

    I believe the windows are in the diagram are designed to be installed in series in blocks of 2 or 3 - our original electrician wasn't really happy with this and installed a connection to each pane independently back to the control board (I'll take a photo of that and post).

    The original brief was that the downstairs and upstairs where seperated so that we could just have 1 section working if necessary (which they obviously aren't). I am more bothered about getting the upstairs working as we have UFH downstairs.

    If anyone can shed any light / has any ideas etc it would be much appreciated.


    Thanks.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines