Good morning Guys,
I refer to Chapter 52 ( 521.9) of BS 7671, Can we use class 5 conductor ( multicore Cable) in fixed Installation for wiring lighting, power ? Grateful if someone can help answer with document evidence.
Good morning Guys,
I refer to Chapter 52 ( 521.9) of BS 7671, Can we use class 5 conductor ( multicore Cable) in fixed Installation for wiring lighting, power ? Grateful if someone can help answer with document evidence.
As in the Regulation, if the cable is protected against damage, then it is fine to be used.
Multiple inset downlights use flex, as, basically, the connection blocks for them do not have enough room for 2x 1.5mm T+E cables, so a JB, and a flex off to the fitting is the usual solution.
Good afternoon Alan,
Thanks for Feedback. I am looking for backup where Class 5 flexible cable is clearly mentioned suitable for fixed installations. We follow BS 7671:2018 here.
Good afternoon Alan,
Thanks for Feedback. I am looking for backup where Class 5 flexible cable is clearly mentioned suitable for fixed installations. We follow BS 7671:2018 here.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site